SOLAR SERDAR – PASSIVE SOLAR HOME DESIGN

RENEWABLE ENERGY CENTER SOLAR SERDAR

Passive Solar Home Design

Your home’s windows, walls, and floors can be designed to collect, store, and distribute solar energy in the form of heat in the winter and reject solar heat in the summer. This is called passive solar design or climatic design. Unlike active solar heating systems, passive solar design doesn’t involve the use of mechanical and electrical devices, such as pumps, fans, or electrical controls to move the solar heat. Passive solar homes range from those heated almost entirely by the sun to those with south-facing windows that provide some fraction of the heating load. The difference between a passive solar home and a conventional home is design. The key is designing a passive solar home to best take advantage of your local climate. For more information, see how a passive solar home design works at http://solarserdar.blogspot.com/.

You can apply passive solar design techniques most easily when designing a new home. However, existing buildings can be adapted or “retrofitted” to passively collect and store solar heat. To design a completely passive solar home, you need to incorporate what are considered the five elements of passive solar design. Other design elements include: Window location and glazing type Insulation and air sealing Auxiliary heating and cooling systems, if needed. These design elements can be applied using one or more of the following passive solar design techniques: Direct gain Indirect gain (Trombe wall) Isolated gain (Sunspace). When incorporating these design elements and techniques, you want to design for summer comfort, not just for winter heating. Your home’s landscaping can also be incorporated into your passive solar design. To understand how a passive solar home design works, you need to understand how heat moves and how it can be stored.More info at www.solar-serdar.com.

As a fundamental law, heat moves from warmer materials to cooler ones until there is no longer a temperature difference between the two. To distribute heat throughout the living space, a passive solar home design makes use of this law through the following heat-movement and heat-storage mechanisms: Conduction Conduction is the way heat moves through materials, traveling from molecule to molecule. Heat causes molecules close to the heat source to vibrate vigorously, and these vibrations spread to neighboring molecules, thus transferring heat energy. For example, a spoon placed into a hot cup of coffee conducts heat through its handle and into the hand that grasps it. Convection Convection is the way heat circulates through liquids and gases. Lighter, warmer fluid rises, and cooler, denser fluid sinks. For instance, warm air rises because it is lighter than cold air, which sinks. This is why warmer air accumulates on the second floor of a house, while the basement stays cool. Some passive solar homes use air convection to carry solar heat from a south wall into the building’s interior. Radiation Radiant heat moves through the air from warmer objects to cooler ones. There are two types of radiation important to passive solar design: solar radiation and infrared radiation. When radiation strikes an object, it is absorbed, reflected, or transmitted, depending on certain properties of that object. Opaque objects absorb 40%–95% of incoming solar radiation from the sun, depending on their color—darker colors typically absorb a greater percentage than lighter colors. This is why solar-absorber surfaces tend to be dark colored. Bright-white materials or objects reflect 80%–98% of incoming solar energy. Inside a home, infrared radiation occurs when warmed surfaces radiate heat towards cooler surfaces. For example, your body can radiate infrared heat to a cold surface, possibly causing you discomfort. These surfaces can include walls, windows, or ceilings in the home. Clear glass transmits 80%–90% of solar radiation, absorbing or reflecting only 10%–20%. After solar radiation is transmitted through the glass and absorbed by the home, it is radiated again from the interior surfaces as infrared radiation. Although glass allows solar radiation to pass through, it absorbs the infrared radiation. The glass then radiates part of that heat back to the home’s interior. In this way, glass traps solar heat entering the home. Thermal capacitance Thermal capacitance refers to the ability of materials to store heat. Thermal mass refers to the materials that store heat. Thermal mass stores heat by changing its temperature, which can be done by storing heat from a warm room or by converting direct solar radiation into heat. The more thermal mass, the more heat can be stored for each degree rise in temperature. Masonry materials, like concrete, stones, brick, and tile, are commonly used as thermal mass in passive solar homes. Water also has been successfully used.

 CROATIAN RENEWABLE ENERGY CENTER SOLAR SERDAR

Željko Serdar

Head of business association

www.solar-serdar.com

solarserdar@gmail.com

solarserdar@yahoo.com

http://solarserdar.blogspot.com/

https://solarserdar.wordpress.com/

Advertisements

About CROATIAN CENTER of RENEWABLE ENERGY SOURCES

CROATIAN CENTER of RENEWABLE ENERGY SOURCES (CCRES)• was founded in 1988 as the non-profit European Association for Renewable Energy that conducts its work independently of political parties, institutions, commercial enterprises and interest groups, • is dedicated to the cause of completely substituting for nuclear and fossil energy through renewable energy, • regards solar energy supply as essential to preserve the natural resources and a prerequisite for a sustainable economy,• acts to change conventional political priorities and common infrastructures in favor of renewable energy, from the local to the international level, • brings together expertise from the fields of politics, economy, science, and culture to promote the entry of solar energy, • provides the opportunity to play a part in the sociocultural movement for renewable energy by joining the association for everyone, • considers full renewable energy supply a momentous and visionary goal - the challenge of the century to humanity. CCRES Željko Serdar Head of association solarserdar@gmail.com
This entry was posted in ALTERNATIVE, ALTERNATIVE ENERGY, GREEN ENERGY, PASSIVE ENERGY, RENEWABLE ENERGY, RENEWABLE ENERGY CENTER SOLAR SERDAR, SOLAR SERDAR and tagged , , , , , , , . Bookmark the permalink.

One Response to SOLAR SERDAR – PASSIVE SOLAR HOME DESIGN

  1. Edmond Edera says:

    This is a good blog. Keep up all the work. I too love to blog. This is great everyone sharing opinions.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s